View Single Post
Old 16 March 2016, 16:19   #43
kipper2k
Registered User

 
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 3,838
Hi,

there are a very few a500s out there with a deep plastic cpu socket that have a hard time grabbing. There are no places on an a500 mobo to feed a screw through both to secure the board fully so it is an issue for a few of you. It is easily fixed by replacing the socket for those that can do the job by using the same type of round pin machine socket. I did have one of those sockets on one of my a500s and it peed me off to the point i removed and replaced it. There are no other type of 64 pin sockets available to use besides the one i use (and majsta uses). so if you cant do the job yourself i am sure someone can do it for you.

Here is the part number at digikey...

http://www.digikey.ca/product-search...ords=ED3036-ND

if link doesnt work, search for this part number... ED3036-ND

Last edited by kipper2k; 16 March 2016 at 16:41.
kipper2k is offline  
 
Page generated in 0.04164 seconds with 11 queries