View Single Post
Old 10 January 2010, 23:10   #3
Thalion Webshrine
alexh's Avatar
Join Date: Jan 2004
Location: Oxford
Posts: 12,228

To be correct the v1.1 board is not really from Amigakit it is from ACube. Amigakit are one of their resellers.

With only 1.5Mbytes of usable RAM on the unmodified v1.1 PCB you'll struggle to use the HDF features without the RAM upgrade. Amigakit offer this upgrade service.

But to be honest you have to ask yourself before you buy a MiniMig for €200 why you are not getting a second hand 2Mbyte A600 for €20


Where might one find this latest firmware?

I imagine you need to re-program the PIC which means you may need a PIC programmer if you buy a second hand MiniMig board as lots were shipped without the Tinybootloader which enables you to program via the serial port.

Last edited by alexh; 10 January 2010 at 23:17.
alexh is offline  
Page generated in 0.04214 seconds with 11 queries