View Single Post
Old 13 July 2018, 18:37   #75
UncleSpam
Registered User
UncleSpam's Avatar
 
Join Date: Jan 2007
Location: Burbank, CA
Posts: 155
For the Indivision AGA MKIIcr DVI connector, I used the provided DVI expansion door and to hold the blue connector in place, I used Silicone RV caulk to attach the connector to the inside of the door.

I centered the connector as well as I could and let it cure for about a day.

On the new cases, that door closes well, from the outside in, with a nice snapping sound and if the DVI cable connection is not too tight/forceful this should last for a long time.

I then routed the cable to the Indivision connector (basically stretched to the max) and then mounted the floppy disk drive.

The Silicone RV caulk can be removed without any damage to any of the components if another option is found.
UncleSpam is offline  
 
Page generated in 0.04048 seconds with 11 queries