View Single Post
Old 11 August 2019, 06:29   #7
klx300r
Registered User
klx300r's Avatar
 
Join Date: Oct 2007
Location: Toronto, Canada
Age: 49
Posts: 827
Question

Quote:
Originally Posted by Daedalus View Post

..Finally, a good PSU won't turn on if it detects a short on any rail. If the A4000 is working fine, then that's not the case here, but some issue with the connectors perhaps could result in a short on one rail.

well I'm seriously thinking a detected 'short' is probably the issue but system working great with orignal PSU so how can that be??? also I just tried a working full sized ATX PSU tonight and readings as follows when not connected to anything again:


Grey -+5.11v
Blue--11.52v
Yellow-+ 12.21v
Red-+5.11v


and yet again like the micro-ATX PSU my A4000 won't boot up at all. Tried attaching an old 'real' hard drive to see if some extra load draw would kick it up but same thing.
klx300r is offline  
 
Page generated in 0.04138 seconds with 11 queries