View Single Post
Old 17 June 2015, 19:53   #1
TenLeftFingers
Registered User

TenLeftFingers's Avatar
 
Join Date: Sep 2013
Location: Ireland
Posts: 791
Unhappy Indivision AGA MK2cr issues

I've just installed this and while I'm able to use my LCD monitor now, there are some serious issues. I've read a lot of threads but I'm still not clear so please bare that in mind when explaining things to me I'd like to keep the device so I'm hoping I can get help with some of these, particularly the ghosting issue:

Ghosting
Like it says on the tin. I've tried different cables. I removed all my shielding as it won't fit (see #3/4) and didn't attach the little cable. But I've read that it doesn't matter and that this is caused by

Can't try other screen modes
When I 'Test' any of the other screenmodes I get the error "Can't open screen. Is this monitor driver installed?". I ran both of the installers from their wiki page.

HD not secure
See the pic - is this safe? The legs don't fit in the hole anymore. I don't need a CF hard disk as 85MB is plenty for me for now. Does everyone have this problem?

Case doesn't close
See the pic. The case is bulging because the HD cradle is raised, keeping the top of the case from coming down flush with the lower half.
Attached Thumbnails
Click image for larger version

Name:	amiga-ghosting.jpg
Views:	574
Size:	25.9 KB
ID:	44484   Click image for larger version

Name:	amiga-hdraised.jpg
Views:	656
Size:	106.4 KB
ID:	44485   Click image for larger version

Name:	amiga-caseraised.jpg
Views:	436
Size:	46.1 KB
ID:	44486  
TenLeftFingers is offline  
 
Page generated in 0.04288 seconds with 12 queries