Thread: ACA500 tested
View Single Post
Old 27 July 2014, 22:55   #474
Registered User

jdryyz's Avatar
Join Date: Jul 2014
Location: USA
Posts: 78
Hello all.

I recently acquired an ACA500 last week. No matter what I try, I do not see more than 1.4MB FAST RAM under WB 1.3. I already checked through all the settings that were suggested here and on other sites. MapROM is definitely off. I do not yet have CF cards inserted so any memory taken for that is not to blame. "ROM" is set to "keep current".

My A500 is a rev 6a motherboard with the 1MB CHIP RAM hack. 512k trapdoor RAM expansion is a SupraRAM rev 2. Kickstart 1.3 is in ROM.

ACA500 is using the latest firmware. I also did a simple return to defaults but that did not help either.

In addition to not seeing all the FAST RAM, my RTC is not recognized (works fine with ACA500 removed).

Attached is my system configuration screen.

Is there anything else I need to check?

Thank you.
Attached Thumbnails
Click image for larger version

Name:	attachment.jpg
Views:	144
Size:	78.1 KB
ID:	40694  

Last edited by jdryyz; 27 July 2014 at 23:14.
jdryyz is offline  
Page generated in 0.04152 seconds with 12 queries