View Single Post
Old 10 February 2020, 10:07   #14
Registered User

Join Date: Sep 2019
Location: Netherlands
Posts: 50
OK, quick followup to this GURU weirdness.

I spent the Saturday disassembling the machine and replacing the parts one by one. Swapped the WarpEngine 4040 for the A3640 (recapped etc.), moved the SCSI2SD to my trusted A2091, then swapped the complete motherboard for my spare A4000D motherboard (yes, I have one, recapped and all).

No change!

The only thing left (besides PSU and floppy) was the SCSI2SD. No... would it, really?

I decided to wipe it clean. Connected it to my machine, launched the SCSI2SD tool and killed all IDs on it. Recreated them with different sizes (512MB for ID1 and 2GB for ID1). Connected to the Amiga again, ran HDToolbox, read the disk parameters and reinstalled.

No crashes anymore

Tried the different 040 libraries, including Thomas' version - works brilliantly. Swapped the A3640 for the WarpEngine, all fine. Runs super fast, no weird crashes... I still expect to see the GURU at startup but it boots straight into my plain 3.1 install...


I'm not a disk expert but maybe the RDB on the disk contained some form of filesystem version that made the machine crash? I'm happy now because I spent a weekend but got my A4000D back to a usable state!
mousehouse is offline  
Page generated in 0.07967 seconds with 11 queries