View Single Post
Old 12 June 2018, 00:17   #1061
dJOS
Registered User

dJOS's Avatar
 
Join Date: Aug 2012
Location: Melbourne, Australia
Posts: 868
Quote:
Originally Posted by demolition View Post
The actual output is not really larger than the cutout. Put some text on the screen and mark up the edges with some tape before you position it behind the cutout to get it properly centered.

It will end up being mounted like this one:
http://www.nightfallcrew.com/wp-cont...110_183230.jpg

This is how I have done it and I have no problems reading the full display, as long as I am not looking from too large an angle (seeing as the display is not flush with the front).
If you are using the full width of the display (change the defaults in the menu) you do need to enlarge the hole slightly.
dJOS is offline  
 
Page generated in 0.03999 seconds with 11 queries