Quote:
Originally Posted by 8 Bit Dreams
keep in mind, once you swap 10k resistor arrays out to 1k you'll be unable to use old 50m firmware on A2000 anymore, and as RC1 fw isn't working - you'll end up with a non-working TF on an A2000.
The best setup i found atm is to mix up the firmwares:
bus jed fom 50m firmware + ram jed from newest RC1
https://picload.org/view/ddlprogr/20...21432.jpg.html
system works very nice and stable, no issues except picky CF card acceptance, also SD to CF is not working
i am using SanDisc Extreme III 30MB/s 4Gb CF card and it works excellent:
https://picload.org/view/ddlprogi/20...21410.jpg.html
giving me 4MB/s so folders and content is loading instantly (had problems with big games like Cannon Fodder previously, it took too long till game loads from CF - that caused flickering picture and sound, now it's in the past) |
Thanks for the info, I was going to try the 10K resistors while I wait for the 1K ones. But I will wait for the 1K only other ones I have are 22R.
4MB is a nice speed, is that with the stock scsi.device or are you using Don_Adan's scsi.device?