English Amiga Board - View Single Post - Amiga RGB to S-Video + composite adaptor

narmi · 04 August 2007, 20:33

That kit needs to be modified to work with PAL. You need to replace the included 3.58 MHz crystal with a 4.43 MHz crystal, and you need to modify the PCB so that the STND signal (pin 1, I believe) is connected to GND instead of +5V. That should be all that is needed.

I'm considering making a PAL version for my A500+ because it cannot be modified easily to be NTSC. I'll update this thread if/when I do that.

04 August 2007, 20:33	#15
narmi Guru Meditation Error Join Date: Jun 2007 Location: Vancouver, Canada Posts: 92	That kit needs to be modified to work with PAL. You need to replace the included 3.58 MHz crystal with a 4.43 MHz crystal, and you need to modify the PCB so that the STND signal (pin 1, I believe) is connected to GND instead of +5V. That should be all that is needed. I'm considering making a PAL version for my A500+ because it cannot be modified easily to be NTSC. I'll update this thread if/when I do that.