English Amiga Board - View Single Post - Problem with Workbench_134.adf from Amiga Forever 7

08 November 2017, 22:43

I have found the following issue with the 1.3.4 Workbench Disk from Amiga Forever 7:

When Starting this disk in emulator using default settings (Compatibility custom) of Amiga Forever 7 the ADF is starting fine.

If I set the compatibility to (slow best) or use an original Amiga 500 the Workbench does not start.

I get an Error:

Software error - task held
Finish ALL disk activty
Select CANCEL to reset/debug

When clicking on CANCEL I get the following red Guru Meditation:

Software Failure. Press left mouse button to continue.
Guru Meditation #00000003.0000A708

If I use the adf disk from Amiga Forever 2016 the 1.3.4 disk works both on real and emulated amiga with slow(best) compatibility.

When looking into the disk I seet that the startup sequence in the new disk has changed but I don't see here what might is causing the problem.

I tried to get an answer from Cloanto support but nothing happens since months. I tried the Facbook page and support which only sends me a standart answe that I should contact the support via their Webpage.

It would be great if someone can help me to find the root cause of the disk Issue.

kind regards

Juliane

08 November 2017, 22:43	#1
juliane2006 Posts: n/a	Problem with Workbench_134.adf from Amiga Forever 7 I have found the following issue with the 1.3.4 Workbench Disk from Amiga Forever 7: When Starting this disk in emulator using default settings (Compatibility custom) of Amiga Forever 7 the ADF is starting fine. If I set the compatibility to (slow best) or use an original Amiga 500 the Workbench does not start. I get an Error: Software error - task held Finish ALL disk activty Select CANCEL to reset/debug When clicking on CANCEL I get the following red Guru Meditation: Software Failure. Press left mouse button to continue. Guru Meditation #00000003.0000A708 If I use the adf disk from Amiga Forever 2016 the 1.3.4 disk works both on real and emulated amiga with slow(best) compatibility. When looking into the disk I seet that the startup sequence in the new disk has changed but I don't see here what might is causing the problem. I tried to get an answer from Cloanto support but nothing happens since months. I tried the Facbook page and support which only sends me a standart answe that I should contact the support via their Webpage. It would be great if someone can help me to find the root cause of the disk Issue. kind regards Juliane Last edited by juliane2006; 08 November 2017 at 23:07.