English Amiga Board - View Single Post

Bloodwych · 03 October 2008, 23:46

That is a very unusual problem and sounds hardware or file system related. The fact that you have tried other pre-installed setups however seems to point to software.

So, you are using a CF-IDE adaptor right?

How big are your partitions on the CF? What filesystem?

Other people use the ClassicWB on A1200's with CF and don't have problems. I'm almost certain it isn't an issue with ClassicWB itself, but more with its install on the CF device.

Try booting into pure Workbench mode (hold right mouse button on boot) and see if it still crashes when you double click DH0:

03 October 2008, 23:46	#2
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	That is a very unusual problem and sounds hardware or file system related. The fact that you have tried other pre-installed setups however seems to point to software. So, you are using a CF-IDE adaptor right? How big are your partitions on the CF? What filesystem? Other people use the ClassicWB on A1200's with CF and don't have problems. I'm almost certain it isn't an issue with ClassicWB itself, but more with its install on the CF device. Try booting into pure Workbench mode (hold right mouse button on boot) and see if it still crashes when you double click DH0: