Quote:
Originally Posted by Futaura
If you have the SCSI menu set to Auto, Async/Sync is selected by the Sync flag in the RDB of the drive. Not all tools give the option of changing it and it will default to Async. So, are you sure you are not using Async mode? You should get much faster speeds than that, even with 6.2.5, when using Sync mode.
Unitcontrol mimics the SCSI boot menu, but any changes you make are temporary. After a reboot, any changes you made revert to the saved SCSI menu settings.
|
Best thing to do is to use SCSIConfig, set the drive to Syncron and save, that way changes will be stay even after a reboot, because the setting is written in the RDB.
Saluditos,
Ferrán.