View Single Post
Old 21 October 2019, 16:19   #5
demolition
Unregistered User
demolition's Avatar
 
Join Date: Sep 2012
Location: Copenhagen / DK
Age: 39
Posts: 3,989
A bad PSU could cause all sorts of errors. When a CD32 will not read discs I would normally suspect the laser (a bad laser would also stop it from spinning since it will only start the motor if it can 'see' the disc), but if you're 100% sure that the laser should be good now and the CD32 was also recapped, then the next step would be to try a different PSU. If you recap your original PSU it should be almost as good as new.
demolition is offline  
 
Page generated in 0.04380 seconds with 11 queries