View Single Post
Old 08 October 2018, 12:04   #10
trixster
Guru Meditating

 
Join Date: Jun 2014
Location: England
Posts: 1,588
Unfortunately i dont seem to be able to update the firmware anymore. The update process ends in failure with the pop-up stating "no dfu capable usb device available". I've tried installing the drivers from the codesrc.com website but the install process does not seem to actually take place. I've tried this on two different W10 pcs. I dont recall having such problems before... There's some poor instructions in the scs2sd quickstart guide about using a program called zadiag to remove "STM32 BOOATLOADER" device but no actual instructions on what to do.

Any advice? I'm currently stuck on firmware 6.1.2

I've actually installed the scsi2sd into my A3000 and am testing it now. This is using async 3.3mb, scsi2. It seems ok at the moment. No read or write errors so far on the sd card.
trixster is offline  
 
Page generated in 0.04139 seconds with 11 queries