View Single Post
Old 17 January 2017, 15:12   #10
hooverphonique
ex. demoscener "Bigmama"

 
Join Date: Jun 2012
Location: Fyn / Denmark
Posts: 1,045
Quote:
Originally Posted by trixster View Post
Hi there, thanks for the reply.

The mobo was recapped by the previous owner but I can't rule out an issue with the psu. It's the original as far as I can tell but I don't know if it too has been recapped. I'm not sure how to check psu rails I'm afraid

One thing I've noticed is that with the cbm zorro daughter board in place I get no id in the Expansion Board Diagnostic. Should I? I don't recall the board ever having its own ID.
Check the rail voltages (particularly 5V) using a multimeter, with the psu connected to the amiga - loading down the rails will be essential to get usable measurements..

The daughter board is just a "dumb" riser, and your A4K should work without it installed...
hooverphonique is offline  
 
Page generated in 0.04105 seconds with 11 queries