View Single Post
Old 24 April 2012, 22:19   #9
BarryB
Amigaholic

 
Join Date: Dec 2009
Location: UK
Posts: 3,183
I had this happen on my A1200, posted another fix in another thread but can't remember where. Anyway, what I did was to cut about 10mm of the end of the flat cable then with the edge of scalpel you can gently lift up the green film from the corner and peel it back to expose the contacts, then you can slice off the green film once you've peeled back enough. Just make sure the exposed contacts are long enough to slide back into the keyboard connector on the board.
BarryB is offline  
 
Page generated in 0.04169 seconds with 11 queries