Hiyas guys,
for the
Apollo 060 and the
Viper 060 (both similary based ACT cards)
you will need tocopy the Apollo libraries from DF0:LIBS/ to your HDD:LIBS/
so that - LIBS:
68o4o.library [43] KBytes
68040.library [392] Bytes
68060.library [64] KBytes
cpu60
[we interupt this program to bring you some Apollo 040/060 hardware pr0n]
(thanks from our sponsors amiga.resource.cx)
You should then copy from DF0:c/ to HDD:C/
C:
cpu060
if you are not using CWOS3.9 then you will also need to replace / patch - setpatch in C: (I would recommend setpatch43_b)
now edit the S:startup-sequence and after setpatch place the following:
"cpu060 B" (without the quotes)
When using Workbench to dump files across remember to rename or delete the orignals
first- I have found that when using the drag 'n drop method of workbench it doesn't overwrite the existing file.
[we interupt this program (again) to bring you some ACT VIPER060 hardware pr0n]
(thanks from our sponsors amiga.resource.cx)
I have attached an Apollo install disk, the installer is buggered/mashed/broken so dont bother with that - it says it works but never does.
just follow the instructions above and that should have you sorted =)