View Single Post
Old 13 October 2018, 08:27   #1134
Jeff_HxC2001
Registered User
 
Join Date: Sep 2008
Location: Paris / France
Posts: 615
Quote:
Originally Posted by demolition View Post
Yes, OLED will wear out eventually, but I doubt you need to worry about it unless you keep the Amiga running 24/7 for years.

I am not sure, these screens seems have some "burn-in" easily.

Plus one important mistake was found on the diymore screens :

https://torlus.com/floppy/forum/view...tart=60#p17196
https://torlus.com/floppy/forum/view...tart=60#p17315

To sum up : This OLED screen is over-driven because of a bill of material mistake (2 resistors values exchanged...).

Anyway the HxC firmware doesn't completely turn off the screen, but dim it to its minimum level after the "standby" timeout value. Then you still can read what is going on without touching the buttons.

Last edited by Jeff_HxC2001; 13 October 2018 at 08:34.
Jeff_HxC2001 is offline  
 
Page generated in 0.04455 seconds with 11 queries