English Amiga Board - View Single Post

Viserion · 09 September 2014, 20:15

Well, it has been a while later than expected.

I sent it off to Stacu100(great job by the way

) to have it upgraded, and he found that it had been over clocked, and one oscillator pin had almost no contact, and broke under desoldering, and a resistor had bad contact.

Still had problems as the 4 port ide has somehow gotten broken, and I had the hardest time getting the FastATA IV to sit properly.

Did manage it in the end.

And still it keeps fighting me.

So how many Atari STs has to be sacrificed for this to work

I did manage to install os 3.9, and was almost finished when I ran into PSF3 errors claiming it was trying to read outside the partition DH0 and others.

As this was a while ago, I can't remember exactly the wording.

Shifted focus to OS 4.1, and I get farther than before, but with the cheap Radeon mentioned in earlier post, I get a picture through the Radeon as shown in picture amigaos41_radeon.jpg(See link).

Now I have tested it in a pc, and it works there. Fearing that it will screw my system up, I haven't booted to any os, but just played around in bios.

Didn't have any issues., and what is seen in picture

Removed the Radeon, and got the error seen in amigaos41_aga.jpg(same link).

https://app.box.com/s/skr4yv3iqfiud7wcdgog

So where to go now, to get this finally up and running.

09 September 2014, 20:15	#43
Viserion Registered User Join Date: Mar 2013 Location: Oslo/Norway Posts: 265	Well, it has been a while later than expected. I sent it off to Stacu100(great job by the way ) to have it upgraded, and he found that it had been over clocked, and one oscillator pin had almost no contact, and broke under desoldering, and a resistor had bad contact. Still had problems as the 4 port ide has somehow gotten broken, and I had the hardest time getting the FastATA IV to sit properly. Did manage it in the end. And still it keeps fighting me. So how many Atari STs has to be sacrificed for this to work I did manage to install os 3.9, and was almost finished when I ran into PSF3 errors claiming it was trying to read outside the partition DH0 and others. As this was a while ago, I can't remember exactly the wording. Shifted focus to OS 4.1, and I get farther than before, but with the cheap Radeon mentioned in earlier post, I get a picture through the Radeon as shown in picture amigaos41_radeon.jpg(See link). Now I have tested it in a pc, and it works there. Fearing that it will screw my system up, I haven't booted to any os, but just played around in bios. Didn't have any issues., and what is seen in picture Removed the Radeon, and got the error seen in amigaos41_aga.jpg(same link). https://app.box.com/s/skr4yv3iqfiud7wcdgog So where to go now, to get this finally up and running.