View Single Post
Old 03 March 2018, 15:36   #12
emufan
Registered User
 
Join Date: Feb 2012
Location: #DrainTheSwamp
Posts: 4,546
Quote:
Originally Posted by Lemaru View Post
You can enable and disable FastIDE using the new VControl app that comes with SAGA Drivers 1.0
ah, thanks, I found the tool:
Code:
3.Ram Disk:SAGADriver.v1.0/C> VControl 
$VER: VControl 1.1 (25.2.2018) APOLLO-Team

HELP/S            This help
BO=BOARD/S        Output Board informations
BS=BLITSYNC/N     Change the BlitSync mode. 0=Off, 1=On
CL=CLOCK/S        Output Core Clock (Cycles)
CO=CORE/S         Output Core Revision String
CP=CPU/S          Output CPU informations
DE=DETECT/S       Detect compatible board
FP=FPU/N          Change the FPU mode. 0=Off, 1=On
HZ=HERTZ/S        Output Core Frequency (Hertz)
ID=IDESPEED/N     Change the IDE speed. 0=Slow, 1=Fast
MR=MAPROM         Map a ROM file
NR=NORGB/S        Standby the native Amiga RGB output
SD=SDSPEED/N      Change the SDPort speed. 0=Fastest, 255=Slowest
SS=SUPERSCALAR/N  Change the SuperScalar mode. 0=Off, 1=On
TU=TURTLE/N       Change the Turtle mode. 0=Off, 1=On
VB=VBRMOVE/N      Change the VBR location. 0=ChipRAM, 1=FastRAM
VS=VIDEOSLEEP/S   Toggle the SAGA Video DMA (Off/On)
emufan is offline  
 
Page generated in 0.03992 seconds with 11 queries