Quote:
Originally Posted by amethyst
Here's how to burn a kickstart eprom in 2 easy steps
Requirements- Eprom Programmer (with support for 27C400)
- Kickstart rom file being used in WinUAE (not encypted and legally created from your own set of A500, A500+ or A600 kickstart roms, of course)
- One blank 27C400 eprom
Step 1: Burn the kickstart eprom
Start up eprom programmer software with 27C400 device selected
Load the kickstart rom file to the buffer
Perform a swap BYTE operation on the buffer contents
Insert the 27C400 eprom into the eprom programmer and burn buffer to the eprom.
Apply opaque sticky label over the eprom window and mark it with version
Step 2: Install into Amiga
Insert eprom into socket (make sure the eprom has correct pin connections and orientation).
Power up and voila it works!
For more details on opening up your amiga and installing the eproms read the amiga kickstart guide from aminet.
|
I tried it yesterday and it works a treat.
Burnt a 3.1 kickstart for my Amiga 600.
Thanks amethyst