English Amiga Board - View Single Post - Problem installing Bloodwych's Copper Workbench

26 December 2003, 01:57

Ok attempted with the different pack..I dont know what Im doing wrong. I got the ClassicWB. It finds my 3.0 Workbench disk no problems at all...goes to install...only puts the files C and S on my AmigaHD HD0: and tells me its done.

these are my exact steps.

Load WinUAE
Set config to match or better min specs
Add Hard Drive called AmigaHD.hdf
Add PC drive where system.zip is
Load with Workbench 3.0
Format Hard Drive
Copy system.zip to AmigaHD
Reboot with ClassicWB_Install.adf in DF0:
Welcome screen comes up --> Hit Return
Warning about HD0: --> Hit return
Insert 3.0 disk screen -->Put in Workbench30.adf in DF0:
Hit ok
Hit return
It checks the version and says Valid Version Found.
I hit Return
It takes maybe 5 seconds and says its done.
I reboot with no floppies.
It comes to CLI screen and sits
If I boot with workbench disk and look at my Amiga HD it only has C and S files.

Im at a loss.

--Update-- I managed to see the error on the screen while installing...

It says Cannot find DH0:System.zip.zip period.

I've tried renaming system.zip to just system....no luck that way either.

T

26 December 2003, 01:57	#12
Thalor Posts: n/a	Ok attempted with the different pack..I dont know what Im doing wrong. I got the ClassicWB. It finds my 3.0 Workbench disk no problems at all...goes to install...only puts the files C and S on my AmigaHD HD0: and tells me its done. these are my exact steps. Load WinUAE Set config to match or better min specs Add Hard Drive called AmigaHD.hdf Add PC drive where system.zip is Load with Workbench 3.0 Format Hard Drive Copy system.zip to AmigaHD Reboot with ClassicWB_Install.adf in DF0: Welcome screen comes up --> Hit Return Warning about HD0: --> Hit return Insert 3.0 disk screen -->Put in Workbench30.adf in DF0: Hit ok Hit return It checks the version and says Valid Version Found. I hit Return It takes maybe 5 seconds and says its done. I reboot with no floppies. It comes to CLI screen and sits If I boot with workbench disk and look at my Amiga HD it only has C and S files. Im at a loss. --Update-- I managed to see the error on the screen while installing... It says Cannot find DH0:System.zip.zip period. I've tried renaming system.zip to just system....no luck that way either. T Last edited by Thalor; 26 December 2003 at 02:04.