View Single Post
Old 25 January 2012, 00:34   #19
stachu100
Registered User
 
Join Date: Mar 2009
Location: Piaseczno/Poland
Posts: 305
Quote:
Originally Posted by alexh View Post
Notice that COSMOS is changing one Agnus chip for the identical numbered Agnus chip only with the different dash part indicating PAL.

I'm not 100% sure you can use an 8375 390544-02 part on a board which had an 8375 318069-11 part and vice versa
You can't mix them.
Pinout is different on these two revisions.
Part must have the same code.
So 8375 390544 NTSC must be replaced by 8375 390544 PAL.
And 8375 318069 NTSC must be replaced by 8375 318069 PAL.
I did that as well:
http://www.amibay.com/showthread.php?t=24137

In my case I've changed 8375 390544-02 to 8375 390544-01.
stachu100 is offline  
 
Page generated in 0.04060 seconds with 11 queries