English Amiga Board - View Single Post

johnnybarker · 18 May 2020, 16:55

So, I "upgraded" my apocalypse today swapping the RAM chips with9x 48LC32M8A2 chips. It should have gone from 128mb to 256mb. However it has gone from 128mb to 128mb (Actually on 122mb in Sysinfo). It is very stable and can play mp3s with amigaAmp 3.27 very nicely so at least not a backwards step.

I am using it with a radeon 128mb, spiderUSB, SB128 and 10mb ethernet card. Winsize jumper is closed. Is it because I don't have enough memspace? Do I need to configure MMUlibs again or is it that one side of the RAM is not working due to my poor soldering?

I did use it with my voodoo instead of Radeon but for some reason the voodoo is well flaky. For the brief time that the system was stable it still only showed the same 128mb of RAM.

Any ideas on the easiest way to test it?

18 May 2020, 16:55	#3960
johnnybarker Registered User Join Date: Dec 2018 Location: Helmsdale Scotland Age: 41 Posts: 181	So, I "upgraded" my apocalypse today swapping the RAM chips with9x 48LC32M8A2 chips. It should have gone from 128mb to 256mb. However it has gone from 128mb to 128mb (Actually on 122mb in Sysinfo). It is very stable and can play mp3s with amigaAmp 3.27 very nicely so at least not a backwards step. I am using it with a radeon 128mb, spiderUSB, SB128 and 10mb ethernet card. Winsize jumper is closed. Is it because I don't have enough memspace? Do I need to configure MMUlibs again or is it that one side of the RAM is not working due to my poor soldering? I did use it with my voodoo instead of Radeon but for some reason the voodoo is well flaky. For the brief time that the system was stable it still only showed the same 128mb of RAM. Any ideas on the easiest way to test it?