English Amiga Board - View Single Post

aeberbach · 04 February 2020, 08:41

RPT-60B is what I have used in multiple supplies, internal in the A1200 and to replace the old C= model inside the brick for the other machines. What you've done looks very neat - even used proper plugs! I just used the pins without housings, heat shrinking each one and plugging each wire individually.

I have never used load resistors. There has always been plenty of load from the Amiga to get it started - perhaps not much of a concern when powering electronics from the 80s more so today's micro-current parts.

04 February 2020, 08:41	#2
aeberbach Registered User Join Date: Mar 2019 Location: Melbourne, Australia Posts: 420	RPT-60B is what I have used in multiple supplies, internal in the A1200 and to replace the old C= model inside the brick for the other machines. What you've done looks very neat - even used proper plugs! I just used the pins without housings, heat shrinking each one and plugging each wire individually. I have never used load resistors. There has always been plenty of load from the Amiga to get it started - perhaps not much of a concern when powering electronics from the 80s more so today's micro-current parts.