View Single Post
Old 25 January 2013, 21:00   #8
prowler
Global Moderator

prowler's Avatar
 
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
Quote:
Originally Posted by amiman99 View Post
Any luck creating bootable hardfile? I have tried multiple hardfiles I could find and none of them work. Some of them will boot, and I can see Hd activity but then it just stops.
Shapeshifter works fine with almost any hardfiles I found.
That's the trouble. A-Max IV hardware is so rare that it's difficult for those who have no experience of it to make any recommendations.

Quote:
Originally Posted by amiman99 View Post
Or maybe there is a way to convert Mac disk images to AMAX format?
Yes, we have found that it's possible to do that by adding a 16- or 32-byte header to the disk image, which can then be written to floppy disk using the Emplant disk imager utility. Whether the header is 16 or 32 bytes depends on the version of the Emplant utility used.

I was about to suggest this as a better method for you to get started because of the lack of experience here with the A-Max IV version of the hardware.

Quote:
Originally Posted by amiman99 View Post
Edit: I got it working!!!! System 7 on A-Max IV on A3000 B&W so far. Next step is full install with color. When I'm done, I'll do a full write up.
Well done! A write up would be very much appreciated by all contributors to the A-Max thread you mentioned earlier.
prowler is offline  
 
Page generated in 0.06745 seconds with 11 queries