View Single Post
Old 18 November 2019, 21:57   #5
solarmon
Registered User

solarmon's Avatar
 
Join Date: Dec 2018
Location: UK
Posts: 716
Also, I would re-seat all socketed chips, inspecting and cleaning the chip pins and sockets appropriately.

Use a proper chip puller for the normal chips, but use a PLCC extractor tool for Agnus. Be very careful when extracting the chips as if it is done wrong, and with the wrong tools it could cause more damage!
solarmon is offline  
 
Page generated in 0.04091 seconds with 11 queries