16 July 2019, 09:52
|
#6
|
|
Hardware Designer
Join Date: Aug 2018
Location: Bialystok/Poland
Age: 50
Posts: 178
|
Quote:
Originally Posted by XsamX1987
That's Lovely what are the parts needed to make something similar
|
- PCMCIA plug, for example Molex 146749-4. Note that regular female pin header 2×34, 1.27 mm pitch won't work, due to different pin diameter. Checked it for myself.
- PCMCIA socket, I use Molex 53484-6811. Note however this one is reversed, it means it is designed to be placed on the bottom side of PCB if the card faces upper side up.
- Two male 2×34 pin headers, pitch 1.27 mm. I use SMT ones.
- Two IDC connectors matching the above headers (2×34, 1.27 mm).
- Ribbon cable, 68 wires, 0.635 mm pitch.
I use the same parts (except of the cables) in my KA02 and KA37 products sold under RastPort.com brand.
|
|
|