Well at this point I have tried every suggestion that has been made. Thank you to those that have made suggestions to fix this but it seems we have reached a point where new suggestions are just a repetition of ideas that have already been suggested.
I have tried every combination of ACTIVE and PASSIVE termination and I have checked the Diode, it is installed correctly but the voltage may be a little low, that is the only thing that I can see may be an issue.
I have ordered a couple of AM33C93A-16PC chips to replace the current PROTO scsi chip that is installed in there and I will report if that makes a difference.
I am fairly certain that the issue is on the A3000 somewhere as the drive/housing/cable combination works perfectly on my PC with Adpatec Card, and another drive/housing/cable combination that also works on the PC has the same issue on the A3000.
Once I swap the chip and test I will report back.
|