View Single Post
Old 02 April 2020, 22:42   #1
Registered User

Join Date: Mar 2020
Location: Bristol, UK
Posts: 6
New to Amiga - SD Card and Kickstart question

Hi everyone.

New to Amigas here and looking to make some upgrades to my A600.

Firstly let me apologise if this has been asked already. I have been looking at tutorials and also searching this forum for answers to some things I can't quite figure out, they are pretty noob things and I'm sorry if they have been asked a thousand times - please let me know what threads to look at.

Basically what I am trying to do is to upgrade my 600 with the added chip ram (eventually getting an accelerator) and also with an 32 gb SD Card running Workbench 3.1 or 3.x and WhdLoad so I can run Octamed off the SD, and have it store games etc.

My question is do I need the 3.X Kickstart ROM to be able to use a 32gb SD or will the 3.1 ROM be ok?
I've also read that i'll need to patch the scsi device if using a sd card this size, and if so how do i go about that?
Are there any other things I should consider?

Once again, sorry for the very noob questions - I found most of what I need from tutorials and guides but i can't seem to find a definitive answer - or if i have i didn't realise it.

Any info would be great.
jlf is offline  
Page generated in 0.04259 seconds with 11 queries