View Single Post
Old 09 November 2019, 12:05   #4
Solo Kazuki
Registered User
Solo Kazuki's Avatar
Join Date: Sep 2004
Location: Poland
Posts: 688
Originally Posted by lesta_smsc View Post
Hello all!

Just a thought, may be someone has already done this, but has anyone tried to combine several Amiga's into one base unit/case/custom 3D printed thingy etc?

The idea I have is having a tier system in order of how they would be 'stacked':


Would this be possible utilising a form of 'KVM' to enable one set of keyboard/mouse to control all of these machines and a selector switch to choose which Amiga to boot? The PSU may require some work, but effectively using a modern PSU to connect the relevant voltages individually to the Amiga's (in parallel so they all have their 'own circuit' so that one PSU can potentially be used to power any of them).

This may be just be wishful thinking, but I like to think of it as how Amstrad Mega PC combined a PC and Mega Drive in one unit.

Your thoughts welcome, and pictures too if you have already embarked on achieving this!

Actually A1200 with CPU card and FastRAM alone is enough, for what reason You need multiple mainboards?

Eventually for some compatibility issues A500, but what gives You rest? With proper A1200 configuration (with HDD) it will ends earlier or later with using only A1200 config.

Last edited by Solo Kazuki; 09 November 2019 at 12:11.
Solo Kazuki is offline  
Page generated in 0.04141 seconds with 11 queries