Thread: A4000 Mediator
View Single Post
Old 19 June 2017, 18:31   #2
trixster
Guru Meditating

 
Join Date: Jun 2014
Location: England
Posts: 1,500
Sonnet Crescendo 7200 G3 400Mhz PPC accelerator


PCI cards - from top to bottom: Soundblaster, Sonnet, Voodoo, Ethernet/Ratte switch


Indivision AGA. There is 'just' enough clearance between it and the Mediator bus board.


Rear of the machine. The voodoo and sonnet brackets now have holes drilled for cooling. The cable goes from the voodoo to the Ratte switch. The switch is also connected internally to the Indi. The VGA is the output of the Ratte to the monitor. On the same PCI bracket as the Ratte VGA port is the Ethernet port (obscured by the cable).


Sonnet with 192MB (3x64MB dimms). This has been modded to work on 5V only Mediators however it still runs ok on my 4000Di V3


3DFX Voodoo 3 3000

Last edited by trixster; 01 June 2018 at 01:15.
trixster is offline  
 
Page generated in 0.04148 seconds with 11 queries