View Single Post
Old 02 July 2020, 18:06   #5
solarmon
Registered User

solarmon's Avatar
 
Join Date: Dec 2018
Location: UK
Posts: 1,180
Measuring the voltages with the motherboard powered should be good enough.

Anywhere where you expect continuity and it does have it is an obvious issue that needs to be resolved. So you are going about this the right way.

If there are any signs of corrosion or oxidation it needs to be cleaned up. Yes, I would reflow the pins of the connectors, and I would check the pins and traces carefully with a USB microscope.
solarmon is offline  
 
Page generated in 0.04457 seconds with 11 queries