View Single Post
Old 29 May 2013, 17:59   #3
Registered User
john1979's Avatar
Join Date: Jun 2012
Location: UK
Age: 40
Posts: 748
Originally Posted by twenty90seven View Post
Could it be because the cf card and the hard drive have workbench 3.1 as opposed to workbench 3.0 installed - but would this cause the hard drive and cf card not to boot at all?
You can use Workbench 3.1 on 3.0 ROMs so that won't be the cause.

Have you made sure the HDD is connected in the correct way round? Also check the jumper on the drive is still set to master.
john1979 is offline  
Page generated in 0.04117 seconds with 11 queries