View Single Post
Old 04 August 2020, 22:40   #9
Registered User

Join Date: Oct 2018
Location: Cologne / Germany
Posts: 15
Originally Posted by cpiac64 View Post
force 5 volt on pin 18 of ricoh, use a diode 1n4007

There is a Diode between D178 and Pin 18.

Input on Diode between D178 hast 4,99V, Output 4.77V.
Input of my new Diode from Pin18 has 4.73V and on Pin2 I can measure 3.86V.

I can measure this 3.86V on the PowerGood at PSU Connector too.

Nothing changed. Still blackscreen.
WStyle is offline  
Page generated in 0.04322 seconds with 11 queries