Quote:
Originally Posted by ShK
Just make blankPC Janus21.IMA and copy contents of CBM-PCJanus.zip in it?
e. Janus21.adf was used with amiga explorer or any other program that can transmit the data via a serial cable to an actual amiga drive. Right dos disk is "CBM DOS32-1".
|
That does not make:
a) proper dos boot disk
b) confirmed working dos boot disk
Quote:
Originally Posted by Amiga_CDTV
This is probably what you want. I just Zoned the .IMG file of the disk (made with Kryoflux as a 360KB disk). It works in VirtualBox and I am almost sure I have used it with my Sidecar and A1020 disk drives as well.
|
Thanks. Exactly what I meant, boot disk that is confirmed working = one unknown variable removed = problem must be in emulation.
Floppy reading is now working (very tiny mistake in floppy controller reset handling, first reset returned an error but bios test didn't care about it, when dos disk boot block executed another fdc reset, it checked for the error)
(Ignore tiny 128k memory size, I set it to smallest possible to make bios memory check as fast as possible..)