View Single Post
Old 27 June 2010, 21:24   #2
Jope
-
Jope's Avatar
 
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 39
Posts: 7,354
a) yes
b) no

Advice: lay the new kickstart ROM flat on it's side and bend all the pins very slightly inwards, then turn it around to the other side and bend those pins inwards too.

What you want to achieve is, that the pins are all at a straight 90 degree angle to the chip body, making insertion into the socket a lot easier.

Apart from that, I don't really know what other advice to give. Put it in the same way as the old chip came out, align the dimple with the dimple in the socket.

I guess my generic advice for everything fits here (well it's generic advice, isn't it): don't screw up.
Jope is offline  
 
Page generated in 0.04214 seconds with 11 queries