View Single Post
Old 30 September 2019, 23:36   #501
Vesuri
Registered User

 
Join Date: Sep 2019
Location: Amsterdam / The Netherlands
Posts: 5
I recently bought a version of this card from AMIGAstore.eu and got it installed in the 0.5MB chip + 1.5MB slow configuration. (Thanks Jope for helping debug my JP2/JP7A brainfart!) Unfortunately neither the OS or the Amiga Test Kit find the RTC on board. SetClock RESET doesn't do the trick. I've measured that the Epson RTC-72421A chip does get 3V from the battery (pins 9 and 18) but other than that I'm not sure where to look at. Any ideas what might cause the RTC not to be found?

I did have the card installed for a moment with an incorrect JP2/JP7A setup. May this have killed the RTC on the card? During the installation process the TOD part of my CIAA also died. Not sure if it's related or not.
Vesuri is offline  
 
Page generated in 0.04111 seconds with 11 queries