Quote:
Originally Posted by jurassicman
Unfortunately I've a bad news...
I visually inspected the disk and there was actually quite some dirt.
I used a cotton pad with some IPA but by removing the dirt I made the disk unreadable.
Now when I try to install it with WHDLoad I get a "Bad Checksum Error".
I've upload anyway the new dump... maybe you can find something useful but the disk doesn't work anymore and it also made some bad noises when making the .scp file.
|
Looks like the floppy heads need cleaning too, scraping usually means the heads are dirty so need cleaning. Sounds like the dirt has built up on the heads and scored/damaged the disk as HxC now shows lots of bad tracks
Clean the floppy heads and disk then try again, but if you hear ANY scraping/squealing noise when dumping eject the disk straight away and check/clean the disk/heads and try again!!
On the plus side, there were 2 tracks that were better dumps than your first so copied them over the first dump and track 79.1 is now OK in dtc when creating an ADF and the CRC now matches the TOSEC ADF!