|
twizzle has you pretty much covered. The other thing to remember about getting the main case off is that 3 of the screens are made to go in to metal and the others, plastic. The 3 longer fine threaded ones go, 2 in the back (into the floppy drive to hold it down and to clamp the case) and the other one goes by the the front near the PCMCIA port. This one screws through the keyboard and the little metal clamp you will find when you take it apart.
When all else fails, go slowly and take notes. Maybe even draw a scale "model" of the Amiga and tape the screws to it as you go. The insides are REALLY easy to deal with. There is really only 3 or 4 parts.
|