English Amiga Board - View Single Post - writing amiga discs from a .adf in an amiga 500

Unknown_K · 28 September 2002, 14:19

Cloanto amiga explorer works fine (kinda slow) for moving adf's from pc to amiga 500 (mine is a 1mb unit).

All you need is a workbench disk to boot the amiga (I used 1.3) the software on the pc send data to the amiga through a null modem cable, this data is dumped to a floppy and then you just run the sopftware. The program sends the adf directly to an unformatted disk in you amiga floppy drive (takes a while since baud rate is 19200). On the pc side it shows your amiga floppy drives you just drag the adf to the drive you want to send it to, the amiga doesnt even have to have a monitor running since its all done from the pc.

28 September 2002, 14:19	#6
Unknown_K Registered User Join Date: May 2002 Location: Ohio/USA Age: 55 Posts: 1,380	Cloanto amiga explorer works fine (kinda slow) for moving adf's from pc to amiga 500 (mine is a 1mb unit). All you need is a workbench disk to boot the amiga (I used 1.3) the software on the pc send data to the amiga through a null modem cable, this data is dumped to a floppy and then you just run the sopftware. The program sends the adf directly to an unformatted disk in you amiga floppy drive (takes a while since baud rate is 19200). On the pc side it shows your amiga floppy drives you just drag the adf to the drive you want to send it to, the amiga doesnt even have to have a monitor running since its all done from the pc.