View Single Post
Old 29 July 2019, 06:36   #1
Registered User

Join Date: Jul 2019
Location: USA
Posts: 1
Can't mount 2 HDF files at once on Ubuntu

Hi all, a couple years ago I imaged my old Amiga with a serial cable setup, and got it running on FS-UAE.

However yesterday I was trying to get it running again, this time unsuccessfully. Would really appreciate if anyone knows what's going wrong.

I have two HDF files. System2.0 (the OS) ( and Work (user data) (

My config looks like this:

    amiga_model = A3000
    kickstart_file = Kick.rom
    ntsc_mode = 1

    uae_hardfile2 = rw,DH0:/home/aaron/Desktop/Amiga/System2.0.hdf,385,1,2,512,0

    uae_hardfile2 = rw,DH1:/home/aaron/Desktop/Amiga/Work.hdf,385,1,2,512,1
Problem doesn't seem able to mount both drives at once.

It'll boot System2.0, OR it'll boot Work:

but apparently not both together.

Furthermore, the "boot priority" variable in `uae_hardfile2` seems not to matter, unless set to -128 in which case it stops all booting of that drive.

Instead...which drive it tries to determined by the ORDER of the commands in the config file!

Whichever one is put the one which boots. (???)

It's very strange. Any ideas? Am I missing something obvious?
Cat is offline  
Page generated in 0.04141 seconds with 11 queries