View Single Post
Old 07 December 2014, 20:05   #145

FOL's Avatar
Join Date: Nov 2006
Location: Barry / UK
Age: 38
Posts: 5,424
Send a message via MSN to FOL Send a message via Skype™ to FOL
Originally Posted by xraynorm View Post

We like tidy amigas. Would just soldering the output of the megamix on to these pins work? So the megamix and amiga audio are combined on the original outputs.

or would there need to be some sort of hardware mixer?

You need a mixer. You could remove the two audio caps and wire amiga audio to the prisma paula input and then wire the primsa mixed output to the other cap pads that go to output.
It should work, but this is just a quick thought. You would have to know what your doing first. Its also down to the user, we will offer as jack board with and without backplate and a basic cable for amiga input and jack output.

We have a new unified driver that is being tested that should cover both clockport and zorro. So once thats tested, we are good to go.

Last edited by FOL; 07 December 2014 at 20:11.
FOL is offline  
Page generated in 0.05854 seconds with 9 queries