Quote:
Originally Posted by SpeedGeek
Since the Rev. 10 release of Romy I've been considering possible uses for the new free I/O pin. One possible use was to generate a /WE signal to support flash memory writes for A3000/A4000 owners using Flash memory adapters (are there any?).
This would require connecting a jumper wire from the Romy adapter to the Flash memory adapters. However, I would strongly recommend a jumper or switch to disconnect the /WE signal from the Flash memory adapters.
If there enough interest in doing this let me know here or on Amibay.
|
All signals are available on the Rom board so i guess in system programming is definately (probably
doable.
I was able to get the 29f160-90 2mb chips booting 4 images. So i don't really know why the other ones gave me problems