Originally Posted by Nobby_UK
You remove the Brass Columns/Stand-Offs and screw them into the Gotek.
Its hard if you don't put one of the Black Screws (that come with the Gotek)
in first --- to make a Guide for the Stand-off.
my gotek has spots for 4 holes underneath it, the black screws that come with the gotek arent long enough to fit through the underside of the amiga into the brass colomns/standofs and then into the gotek?
And it looks like you can only fit 3 screws from the bottom - the front right corner underneath the LED of the gotek doesnt have a hole in the amiga there to screw, so you have to screw it into that flimsy piece of plastic in the amiga?