View Single Post
Old 24 October 2014, 18:44   #1
Junior Member
Melroc's Avatar
Join Date: Sep 2002
Location: (void)
Age: 42
Posts: 91
Send a message via ICQ to Melroc
Major problems using Gotek USB drive

Hi there,

I've successfully flashed a GOTEK USB drive via Win XP.
With Win7 the device wasn't recognized.
The flashing process went without any error at last.

After disconnecting any cables for flashing from the drive i've connected the GOTEk to my A500. (Rock Lobster Board / Rev. 6A)
The GOTEK toastet my USB Stick and my USB HUB when i powered my Amiga.

What went wrong here? It was flashed absolutely correct with the latest .HEX file v1.05 and it showed no error, verify was also correct.
Maybe i did not connect it correctly to the Amiga?!

in which direction should the data cable / power cable be connected to
the GOTEK? Can a wrong direction of the cables be the cause of this?

The LED display shows "- - -" with and w/o an USB stick attached to the GOTEK. What should it display w/o an USB stick?

Any advice here?
Melroc is offline  
AdSense AdSense  
Page generated in 0.03942 seconds with 10 queries