View Single Post
Old 08 October 2014, 17:40   #9
pandy71
Registered User
 
Join Date: Jun 2010
Location: PL
Posts: 1,546
Remember - modern LCD are at best 3.3V devices - weird brand can be less robust (poorer design) than good brands. Placing to high voltage (higher than Vcc) on some SCART input pins can damage permanently TV (TV should have protection on all inputs but... cost reduction, worse design, lack of testing and...).
All measurements on SCART pins should be performed on load - nominal load for pin 8 is 10kOhm, for pin 16 is 75 Ohm.
pandy71 is offline  
 
Page generated in 0.04765 seconds with 9 queries