Quote:
Originally Posted by Toni Wilen
Why do you think D3D can't be pixel perfect? You have config error somewhere, possibly even display driver control panel setting if you get blurry output in D3D mode. (also make sure filter mode is "no filtering", not "default")
|
Ok. I found my problem with d3d. The Problem was connect at the i used a Scanline Original + Scanline in Extra Setting Filter.
iI do a test; and the original scanline (in Menu Line mode) is more real; there is scanline when use resolution with 256pixel in Heigh and there isn't when use the resolution with 512pixel in Heigh; It possibile keep active the Menu Line mode when it set Resolution AutoSwitch On?
Very Thanks.