View Single Post
Old 01 July 2014, 01:37   #459
Registered User
Join Date: Nov 2011
Location: Detroit
Posts: 50
After having some issues with the firmware flash step, I now have two Goteks flashed.

At least according to the flash loader, reached the end successfully.

I loaded the SELECTOR.ADF onto an 8gb and a 1gb usb stick in the root of the stick.

When I connect the emulator to the amiga, or to a power supply the display just shows "---"

This is on both emulators, with either stick.

I have the connections for flashing all removed, and the jumper set to S0.

I have connected it to both floppy connectors on my Amiga 2000, but it never boots from the emulator, and the display on the emulator never shows 000 or H-C

Any ideas? What is the boot sequence of the LED display supposed to be?
MoreBITS is offline  
Page generated in 0.03890 seconds with 10 queries